Thursday 11 September 2014

// // Leave a Comment

Root I747MVLUFNH2 Android 4.4.2 KitKat Firmware Galaxy S3 SGH-I747M (Canada) - How To

Here is a complete tutorial on how to root I747MVLUFNH2 Android 4.4.2 KitKat firmware on Galaxy S3 I747M. If you yet to update then visit here: I747MVLUFNH2 Android 4.4.2 KitKat Firmware For Galaxy S3 SGH-I747M (Canada) - How To Guide. Installing a new firmware update removes root access and since most of you would have already updated to this firmware, can now root your phones again using our tutorial. Our rooting process have 100% success rate. The root method works for Galaxy S3 on VLUFNH2 Android 4.4.2 KitKat updated from Samsung KIES or OTA or manually using our firmware installation tutorial. You can now easily root I747MVLUFNH2 Android 4.4.2 KitKat on Galaxy S3 I747M with the root package given in this tutorial.

For you information, a rooted device offer you capability to completely utilize the hardware resource as well as eliminate any limitation that comes with stock or official firmware. Once rooted, you can access system files, can overclock/underclock CPU and GPU, can use various MOD as well as those apps that ask root access. Please note, once you root your device, your manufacturer warranty will be void. You can only regain it by following proper unroot process. You can read this article to know more about benefits of rooting: Benefits of Rooting Android Devices.

Before moving towards rooting of I747MVLUFNH2 Android 4.4.2 KitKat firmware, we have to go through some pre-requisites.

Must Read: How To Disable KNOX Security Service on Samsung Galaxy Line Up

Warning: This tutorial is only for Galaxy S3 SGH-I747M (Canada). Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.


Pre Requisites:

Though root don’t erase internal memory data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation.

1. Although not required but you should backup your device data to avoid uncomfortable situation. You can follow our ultimate backup guide.

2. Make sure your device have at least 60% battery power. If your phone shut down during rooting then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily

3. You already have USB Driver Installed for Galaxy S3 SGH-I747M (Canada) in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S3 SGH-I747M (Canada). [Guide]

5. To complete this rooting procedure we will use a tool called Odin which support Windows system only.

How To Root I747MVLUFNH2 Android 4.4.2 KitKat On Galaxy S3 SGH-I747M (Canada) (Black Edition)

  1. Download Odin v3.09 and root file for I747MVLUFNH2.
  2. Extract CF-Root zip file that you downloaded earlier from above link, you will get a .tar.md5 file.
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy S3 SGH-I747M (Canada) in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. You will see an “Added!!” massage in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that CF-Auto-Root-d2can-d2vl-sghi747m.tar.md5 file that you get in Step 2. If you are using old Odin then add the file to PDA button.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy S3 SGH-I747M (Canada) will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! I747MVLUFNH2 Android 4.4.2 KitKat firmware that running on Samsung Galaxy S3 SGH-I747M (Canada) is now rooted. You can check your success by installing an app called “Root Checker” which is available for free from Google PLAY store. You can now visit this Best Apps For Rooted Android Devices (Android Phones & Tablets).

0 comments:

Post a Comment